HazardKey
Hazard Sky · HazardKey™
One keyed position.
Every accessory.
HazardKey isn't another bracket. It's a mounting standard: a four-lobed keyed position that repeats across every rail, plate and base we build. Learn one joint and every accessory in the line bolts wherever you want it, in four orientations, with one hex key.
- FitmentsJL Wrangler · JT Gladiator · Universal
- HardwareOne cap screw per mount. No nuts.
- Indexing90° steps, screw stays captive
- MadeMachined in the USA · Patent pending
How it works
Three moves, and it's mounted
A keyed position is a shallow lobed recess with a tapped hole through its centre. The accessory's key seats in the recess so it can't twist, and its own bolt threads into the host. That's the whole mechanism, and it's the same everywhere on the system.
Pick a position
Every rail, plate and base carries the same keyed positions. Choose the one that puts your accessory where you want it.
Seat the key
The key is machined into the mount. It drops into the lobed recess and the accessory can't rotate on you.
Run the bolt in
The cap screw threads straight into the rail. No nut, no backing plate, no reaching behind a panel.
Four lobes, four orientations
Aim it, don't shim it
Four lobes at 90° means four honest entry angles and nothing in between, so a mount can't creep to a partial angle on a washboard road.
- Loosen the screw until the key clears the recess.
- Lift, turn 90°, 180° or 270°, drop it back in.
- Retighten. The screw stays captive the whole time, so nothing lands in the dirt.
Same mount, four positions
Start here
Pick a rail, plate or base
These are the pieces that put keyed positions on your vehicle. Every accessory below fits all of them, so what you buy first only decides where the mounting lives, not what you can hang on it later.
Cowl Side Accessory Rail
Ten keyed positions down each side cowl. The on-ramp to the system, and the one most builds start with.
$79.98View →JL / JTCowl Top Accessory Rail
Runs across the top of the cowl and opens a second plane of mounting, clear of the side rails.
$125View →JL / JTBillet Hood Bumper Kit
Replaces the factory plastic hood bumpers with machined aluminum carrying four keyed positions each.
$175View →UniversalCNC Hawse Fairlead
Guides the rope and carries keyed positions at all four corners, so the winch plate stops being dead space.
$125View →Then add to it
Accessories that fit every position
One key, one bolt, any host. Move them around the vehicle as the build changes instead of buying a new bracket each time.
Install guides
Printed sheets, free downloads
Every HazardKey install sheet is here as a free PDF. Read one before you order, or print a fresh copy when the one on your bench goes missing.
Attachment System
How any single-key mount attaches to any keyed position, and how it indexes in 90° steps.
JL / JTCowl Side Accessory Rail
Rail layout, the two joints, and the four steps from box to bolted on.
All productsFull guide index →
Every Hazard Sky install sheet, HazardKey and legacy platforms alike.
- Material
- Aluminum, anodized
- Hardware
- Socket-head cap screw, supplied
- Tools
- Hex key to suit the supplied screw
- Fitment
- JL · JT · universal hosts
Where it goes next
The line keeps growing
There are new rails and new accessories on the bench constantly — new places to put keyed positions on the vehicle, and new things to hang off them. Every one lands on the same keyed position, so whatever we release next bolts straight to the rail you already own. Nothing you buy today gets orphaned.
Dealer inquiries. Shops: wholesale pricing and counter display kits are available. Reach out through the contact page and we'll send the sheet.
Bronco fitments in development. Want to know when they land? Subscribe at the bottom of any page.